语言版本:
扫一扫手机版二维码 手机
您现在所处位置:优发国际官网 > 产品展示 >
参加展会消息
动态 更多
夹层玻璃
平/弯钢化玻璃
防火玻璃
彩釉玻璃
LOW-E 镀膜玻璃
平/弯钢化玻璃

钢化玻璃是将玻璃通过急速升温再急速冷却而形成的强化玻璃。其抗冲击力、抗弯曲力、抗温差能力是普通玻璃的三至五倍。而且当不慎使其破碎时,它便碎成颗粒状,不会对人体造成严重伤害。因此,钢化玻璃是目前应用最广泛的首选安全玻璃。
Tempered glass is a safety glass and is widely used in those occasions putting for ward a very high demand for the mechanical strength and safety, such as glass doors, elevators, show windows, build ings-major face windows, furniture and household electric appliances.

◎高强度 HIGH STRENGTH
钢化玻璃与同等到高度的浮法玻璃相比,抗弯曲和耐冲击强度高3-5倍。
Compared to float glass with the same height, tempered glass possesses a bending and impact resistant strength three to five times higher.

◎安全性SAFETY
钢化玻璃受冲击时不容易破碎,玻璃破碎后成较小钝角颗粒碎片,对人体会不造成严重伤害。
Being hard to be broken in impacts and becoming very small particle fragments with obtuse angles tempered glass cause no injuries to human body.

◎应用 APPLICATION
钢化玻璃属于安全玻璃,广泛应用于对机械强 度和安全性要求较高的场所,如玻璃门、建筑 幕墙、室内隔断、电梯、橱窗、建筑主面窗、 家具、家电等等。
Tempered glass is a safety glass and is widely used in those occasions putting forward a very high demand for the mechanical strength and safety, such as glass doors, elevators, show windows, buildings-major face windows, furniture and household electric appliances.

弯钢化玻璃
弯钢化玻璃多应用于弧面造型玻璃幕墙、采光天棚、观光电梯、室内弧形玻璃隔断、玻璃护栏、室内装饰、家具等。
Curved tempered glass or curved thermal strengthened glass is formed by heating a float glass sheet till a sintering temperature to make the glass curved and shaped and then making the glass cooling rapidly and evenly with a dedicated equipment. Adopting the advanced roll table synchro nous product ion technique, ourcompanycan re gulatethe model flexibly and randomly for producing glass with arc surface, good appearance quality and excel lent optica I performance.

◎特点 CHARACTERISTICS
安全性、抗冲击强度、热稳定性同平钢化玻璃一样,其抗风压强度和挠度性能高于平钢化玻璃,是安全玻璃。
With the safety, anti-impact strength and thermal stability the same as that of flat tempered glass, such glass has an anti-wind-pressure strength fluidity performance better than that of flat tempered glass and thus is a kind safety glass.


热浸技术
新华强引进当今最先进的热浸技术及设备,严格执行《BSEN14179-1:2005》标准操作,将强化玻璃中偶然存在的硫化镍(Nis)杂质,在持温的热浸炉内严格控制,由于硫化镍(Nis)会由高温的αNis转换成低温的βNis的状态。转换会伴随 24%体积扩张,若其位置正好在张力层,则会在热浸炉内先爆开,以达降低强化玻璃安装后瞬间破裂机率的目的。 目前应用最广泛的首选安全玻璃。
SUMGLAS Introduction of the most advanced technologies and equipment of hot-dip, "BS EN141 79-1: 2005" strict implementation of standard operating, will strengthen the occasional presence of nickel sulfide glass (Nis) impurities in the strict control of holding temperature of hot-dip furnace, becausethe vulcanization nickel (NIS) will be converted by the high temperature a Nis into αstate cryogenic βNis. Conversion is accompanied by a 24% volume expansion, and its location just in the tension layer will in hot dip furnace first burst open, reduced to achieve the purpose of tempered glass in st ailed immediately after the rupture probability. Cur re ntlythe most widely used choice for safety glass.

◎特性 BENEFITS
计算机控管,质量保障 全世界最知名的计算机全自动控制系统,质量有保障。 降低强化玻璃破裂的机率 强度及安全并重 强化玻璃为普通玻璃强度之3-5倍,理应很安全才是,但偶然发生强化玻璃已经安装后甚至使用很多年后,在不明原因 情况下瞬间破裂,造成车辆、人员等的伤害,为使用都可以兼顾的情况下,设计时指定强化玻璃加热浸(HEAT SOAK TEST)为必要的条件。
Computerized control system.guaranteed quality.
TheTamglassfull-automated computerized control system is internationally recognized and offers guaranteed quality Reduces risks of spontaneous breakage of tempered glass.
Increases strength and safety.
Tempered glass is 3-5 times stronger than annealed glass and is very safe. However, after installation, tempered glass may shatter spontaneously for no apparent reason, sometimes even after being used for many years. These rare incidences of breakage cause damage to cars and people. To re ducethe frequency of such instances, glass should specify the heat soaktest during design.

◎用途 APPLICATIONS
任何强化玻璃均必要做热浸处理
All tempered glass should undergo heat soak testa


 
优发国际官网
至此已有 76555 人访问过本网站
回到页顶  

给我发消息
给我发消息
关于我们  ‖   发展历程  ‖   企业文化  ‖   产品展示  ‖   联系我们
公司地址:江苏省昆山市千灯镇汶浦路61号  电话(TEL):4008200368
© 2015 优发国际官网 All rights reserved. 版权所有 苏ICP备16042876号-1 技术支持:EarthWeb